Home -> In the Spotlight -> Leica GeoMoS Version 4.0 Unites The Geodetic and the Geotechnical World

07-03-2008

Leica GeoMoS Version 4.0 Unites The Geodetic and the Geotechnical World

 

Leica GeoMoS v4.0 is the latest update to Leica Geosystems’ well known GeoMoS, an open, scalable and customizable software suitable for a wide range of monitoring applications. Version 4.0 unites the geodetic and the geotechnical world. It supports Campbell Scientific dataloggers, providing more flexible integration of geotechnical sensors whilst the addition of “virtual sensors” enables combination of measurements and results at a mathematical level.

 

With Version 4.0, Leica GeoMoS now supports the integration of Campbell dataloggers that can connect most commercially available analog geotechnical sensors, performing both signal measurement and sensor excitation. The dataloggers are programmable and record data over time from connected geotechnical sensors. GeoMoS Monitor interfaces with the dataloggers, enabling the measurement data to be read and stored in the GeoMoS database.

 

Understanding the reasons for movements

Geotechnical sensors measure non-georeferenced displacements or movements and related environmental effects or conditions. The major uses of these sensors are to:

 

  • directly measure mechanical, electrical, thermal, chemical or optical parameters,
  • measure relative movements directly on the structure,
  • measure below the surface or inside the material of the structure,
  • measure environmental affects that can be used to calibrate other instrumentation (e.g. meteorological corrections to total station measurements). 
Supplementing the geodetic measurements with geotechnical data can help to understand the reasons for any detected movement and to improve the failure prediction.


Leica GeoMoS quickly detects movement in natural or man-made objects.

 

Virtual sensors easily integrated

Additionally, Leica GeoMoS v4.0 supports so-called “virtual sensors”, which allow the user to model the output of one or more sensors using constants, mathematical functions and/or logic operators. Virtual sensors can be used for calibration of measurements or computation of parameters of interest, such as convergences or torsions. Virtual sensors are easy to configure and can be analyzed in the same way as the more traditional measurement data and results.

 

Leica GeoMoS v4.0 requires a valid software maintenance key for successful installation and operation.

 

Internet: www.leica-geosystems.com